DISPENSING ACCESSORIES

$999.00

Kegerator
This kegerator allows the brewer to be pouring from 2 different kegs at the same time and has room for a third keg ready to be tapped.

$249.00

50L D-Type Keg
50L D-Type Keg, the same as those used by the breweries. Also known as Sanke Kegs.

$190.00

1/4 Barrel (29.81L) D-Type Keg
29.81L (1/4 barrel) D-Type Keg, the same as those used by the breweries. Also known as Sanke Kegs.

$165.00

1/6 Barrel (19.87L) D-Type Keg
1/6 Barrel (19.87L) D-Type Keg, the same as those used by the breweries. Also known as Sanke Kegs.


$60.00

D-Type Coupler
Coupler for D-Type kegs to connect to CO2 and beverage lines.

$16.00

Liquid D Type Adaptor
Screws onto the top liquid port on the D Type Coupler to allows the brewer to use Cornelius Keg disconnects on a D-Sanke Keg.

$16.00

Gas D Type Adaptor
Screws onto the side Gas In port on the D Type Coupler to allows the brewer to use Cornelius Keg disconnects on a D-Sanke Keg. 

$79.00

Spear Removal Tool
Allows the brewer to remove the spear on our standard kegs to clean them. Kegs are available in 1/6 barrel, 1/4 barrel and 50L.


$229.00

BrewKeg Transfer Kit (D Type)
To enable you to transfer beverage from a BrewKeg to a D-Type keg.

$199.00

19 Litre AEB Keg
Keg straight from your brewery and start another brew.

$178.25

9.5 Litre AEB Keg
Keg part of your batch into a small Corny keg and take to a party.

$130.00

Micromatic regulators for large gas cylinder
A Micromatic regulator to attach to a large gas cylinder, with an adaptor to connect to the WilliamsWarn Personal Brewery.


$561.50

Complete 19L Keg Set, Plastic Tap With Regulator
For counter-pressure filling a keg from your WilliamsWarn and then dispensing.

$400.00

Complete 19L Keg Set, Plastic Tap Without Regulator
For counter-pressure filling a keg from your WilliamsWarn and then dispensing.

$643.89

Complete 19L Keg Set, Stainless Tap With Regulator
For counter-pressure filling a keg from your WilliamsWarn and then dispensing

$483.00

Complete 19L Keg Set, Stainless Tap Without Regulator
For counter-pressure filling a keg from your WilliamsWarn and then dispensing


$120.00

BrewMaster Transfer Kit (Corny Kegs)
Both the keg filling fitting and the keg pressure relief fitting so that you can fill a keg from your BrewMaster.

$130.00

BrewKeg™ Transfer Kit (Corny Kegs)
Enables you to fill a Corny Keg from a BrewKeg™.

$92.00

Corny Keg Pressure Relief Connection
This fitting is attached to the in-port of a corny keg when transferring beverage from brewery to keg.

$30.00

BrewMaster Beer Transfer Line
This fitting enables an owner of a WilliamsWarn to connect from the brewery to a corny keg out port and transfer the beverage easily from the bottom without losing gas. 


$37.00

Gas Dispense Line
The gas line that is part of our two Keg Dispense Sets (plastic and stainless taps). Normally purchased as part of the sets.

$77.00

Beer Dispense Line With Plastic Tap
The dispense line that is part of our Keg Dispense Set with Plastic Tap. Normally purchased as part of the set.

$165.00

Beer Dispense Line With Stainless Steel Tap
The dispense line that is part of our Keg Dispense Set with Stainless Steel Tap. Normally purchased as part of the set.

$120.00

Stainless Steel Beer Tap with Flow Controller
S/S Tap Fitting with Flow Controller to regulate the flow for optimal pouring


$110.00

Stainless Steel Stout Tap
This specialty stainless steel stout tap can be used for Irish Stouts gassed up with mixed gas